
New Job Openings
For Job Seekers
Note

Available Vacancy
SeniorTechnician Date:12/03/2020 Job Ref No.: TXSTA RJP053PR019
Must be a Diploma/ITI holder and have at least 3-5 years’ experience in UAE/ Middle-East of trouble shooting, and conducting Preventive and Corrective maintenance of process field instrument, mandatory with UAE valid license.
Leading the team, perform PM/CM activities, Calibration, Validation/Verification of instruments,
Troubleshooting & rectification, Reporting, Support dewatering works, Site coordination with client , attend emergency calls, Risk assignment, Safety, Housekeeping etc.
Requirements:-
Good diagnostic and problem-solving skills & Team management skills.
The confidence to respond positively when under pressure;
The ability and desire to keep up-to-date with technological developments in the field.
Preventive and Corrective Maintenance of all type of pressure, flow, Temperature and level instruments
He should be able to perform Calibration of instruments/Validation/Verification of instruments (MOV, FT, PT, and WQA & LT).
Job assigned by Client engineer related to PM/CM activities.
Cable laying, glanding and termination of instrumentation cables.
Calibration of field Instruments like Transmitter & Gauges for Pressure, Flow, Level and Temperature
Project Engineer Date: 12/03/2020 Job Ref No.: TXSTA RJP052PR019
To Perform Managerial, Technical, Coordination, Administrative work in Planning, Directing, Reporting, Spare Managements, Execution, Reliability Centered Maintenance,
Supervising and overall Project Management of Corrective/Preventive Maintenance works at Pumping stations, Reservoirs, Well fields and Network locations
Submitting the daily team planning and site activity to clients engineers for review and approval.
Provide I&C maintenance leadership and support Client engineers throughout the planning, execution and post close out phases of maintenance activities under this project and to ensure overall business performance objectives are achieved
To ensure work is completed by the maintenance teams as per the schedule & carrying out quality inspections on jobs;
He should be able to perform Calibration of instruments/Validation/Verification of instruments (MOV, FT, PT, and WQA & LT).
To ensure the maintenance teams working at site are having proper safety equipment’s (safety shoes, safety jacket, oxygen mask, helmets) etc.
To ensure all the maintenance teams adhering all the safety rules and regulation at work place.
He will be responsible for monitoring and assessing hazardous and unsafe situations and developing measures to assure personnel safety.
Prepare and carry out risk assessments and consider how risks could be reduced, outline safe operational procedures which identify and take into account all relevant hazards,
carry out regular site inspections to check policies and procedures are being properly implemented, ensure working practices are safe and comply with DEWA safety standards
Conduct Tool box talk, keep records of inspection findings and produce reports that suggest improvements, record incidents and accidents, Overall responsibility of Safety under this project and as per term of condition of contract.
Carrying out routine scheduled maintenance work and responding to equipment faults;
controlling maintenance tools, site store and equipment; Dealing with emergencies, unplanned problems and repairs.
Assistant Engineer (PLC/SCADA) Date: 12/03/2020 Job Ref No.: TXSTA RJP056PR019
Qualifications and Work experience must be a Bachelor/Diploma holder in Instrumentation/Electronic/Electrical engineering with 3-5 years of experience in PLC, SCADA
(Rockwell Automation, Schneider electric etc.)& IT peripherals, having knowledge of various type of communication protocols and its working principles etc. Should have a UAE driving license.
Senior Technician (PLC/SCADA) Date: 12/03/2020 Job Ref No.: TXSTA RJP057PR019
Should well aware about the concept of I/O connections
Should be able to do the visual inspection of the panels and to record the results of various PLC systems
Ability interpret the wiring drawing of the PLC panel
Should experience in handling specialized control systems tool
Having a good command over communication
Expertise in PLC Panel Wiring and SCADA LAN cabling
Technician Date: 12/03/2020 Job Ref No.: TXSTA RJP054PR019
Performing all task as directed by Engineer / Team leader.
Perform periodic maintenance of field instruments (MOV, PT, FT, AT, TT, LT Enclosures etc.) as per DEWA checklist
Assisting the team leader for all kind site issues
Strictly following safety rules at site (safety shoes, PPE, safety helmet etc.)
Should be able to do cable pulling, manual excavation for duct laying etc.
Wiring, Termination, glanding of power/instrumentation cables.
Assist in Housekeeping and Dewatering works
Assistant. Technician Date: 12/03/2020 Job Ref No.: TXSTA RJP055PR019
To Assistant Senior Technician and Technician for PM/CM activities. The ability to pay careful
attention to details.
To perform proper housekeeping activities.
To perform Dewatering works.
Loading and unloading of field devices.
Excavation works required for Cabling/Ducts.
Any other works related to PM/CM activities
Plumbing Supervisor Date: 15/03/2020 Job Ref No.: TXAFB SJP014PR007
1. Should be able to plan, allocate and monitor manpower and resources with respect to all plumbing work.
Plumber Date: 15/03/2020 Job Ref No.: TXAFB SJP013PR007
1. All supplied plumbers shall have a minimum qualification of ITI or equivalent technical training certificates related to plastic piping systems.
Skilled High Pressure Welder Date: 15/03/2020 Job Ref No.: TXAFB SJP008PR007
1. Welders shall have hands-on experience in operating all inverter type, diesel generators and rectifier type welding machines. Any intentional tampering of welding machines shall be considered as violation of DEWA asset and shall be back charged to the supplier.
Fabricator Date: 15/03/2020 Job Ref No.: TXAFB SJP005PR007
Should be experienced in working on Mechanical equipment as skilled fabricator preferably in a Power / Process Industry. Should able to read and sketch simple drawings for the job as required. - knowledge of piping industry. read and sketch drawings of the job and capable of doing gas cutting and cold cutting. -Should have the knowledge of materials, pipes, fittings, alignment and able to fabricate platform, ladders, supports and piping. -Should be capable of understanding and handling small rigging tools and jobs. Shall be able to operate and maintain tools and machines issued for the job.
Painter Date: 15/03/2020 Job Ref No.: TXAFB SJP016PR007
1. Painter shall have appropriate practical and theoretical knowledge and experience for safe painting of equipment, building, plant accessories etc Painter
Low Pressure Welder Date: 15/03/2020 Job Ref No.: TXAFB SJP007PR007
Minimum Five years experience in the field jobs and should have qualified for 6G position, Radiographic quality. Should be familiar with GTAW and SMAW welding as a Low Pressure Pipe Welder in Power / Process Industry and should have worked in UAE at least for 2 years. Should be able to do brazing, Gas Cutting & Gas Heating jobs. Should be able to follow WPS instructions and work accordingly. Should have working knowledge on Fabrication aspects involving piping, fittings,structural etc.
Highly skilled Mechanical Technician Date: 15/03/2020 Job Ref No.: TXAFB SJP006PR007
Minimum 10/15 years experience in Power/process industry or suitable skill/knowledge. should be experienced in working independently on mechanical equipment like pumps ,compressor, gas,turbine,boilers etc.Must be able to understand job easily and guide a group working along with.Should possess sound technical knowledge.
Heavy Bus Driver Date: 15/03/2020 Job Ref No.: TXAFB SJP012PR007
1.Minimum two years experience in heavy bus driving in UAE.
Workshop Machinist Date: 15/03/2020 Job Ref No.: TXAFB SJP011PR007
1) Minimum Five years experience in the field jobs and should have relevant educational/technical knowledge. ITI is added advantage.
Skilled Mechanical Technician Date: 15/03/2020 Job Ref No.: TXAFB SJP004PR007
Should be experienced in working on Mechanical equipment as skilled mechanics preferably in a Power / Process Industry. Should be able to work independently on large pumps, compressors, valves etc.
Sales Engineer (Flow metering) Date: 09/03/2020 Job Ref No.: TXSTB AJP050PR011
Hired Machinery Operator : 10 persons required Job Ref No: TXSTARJP068PR032 - Date: 27/05/2020
Light Duty Driver : 20 Persons required - Job Ref No: TXSTARJP067PR032 Date: 27/05/2020
Surveyor with DVRS/Auto Leveling instruments- 10 Numbers -Job Ref No: TXSTARJP066PR032 - Date: 27/05/2020
Heavy Duty Drivers- 25 numbers required - Job Ref No: TXSTARJP069PR032- Date-27/05/2020
Job Description:
minimum 5 years driving experience in UAE. A typical workday varies depending on the route and are responsible for efficiently transporting materials from one location to another. based on listings we analyzed
Marketing and sales Incharge -Job Ref No TXSTMAJP072PR037 Date-21/07/2020
Job Description:
Technical Assistants- 15 Persons required- Job Ref No. TXSTARJP065PR032 Date-27/05/2020
Job Description:
Customer Service Executive. Date : 03/09/2020. Job Reference number - TXTEATEJP075PR039
A well reputed Brokers Company is looking for a Customer Service Executive in Dubai
Problem solving and analytical skills.
Minimum 2 years experience required
Demonstrated ability to communicate, present and influence credibly and effectively at all levels of the organization.
Maintain a tracking system for customer and their queries
Excellent verbal and written communication skills
Promote positive culture and support all the employees in any job relevant concern
Must be time oriented
People with UAE visa are preferred
Qualifications: Minimum Bachelors Degree Required.
Salary: based on experience
Nationality: Any
We are looking for a Data Entry Operator to work from home or office as part-time. Data Entry Operator responsibilities include collecting and entering data into the System and will be responsible for maintaining accurate, up-to-date and usable information in our systems.
1. Preparing and sorting documents for data entry.
2. Research and obtain further information for incomplete documents 3. Scan documents and print files, when needed.
4. Respond to queries for information and access relevant files.
5. Testing new database systems and software updates.
